The Poolfolie Rund - The Right Choice For Your Garden Pool

The poolfolie rund - the right choice for your garden pool

The poolfolie rund is suitable for round pools with a depth of up to 0.9 m. The pool lining consists of a high-quality, UV-stabilised PVC material with good bestanbarkeit against salt water, chlorine and cleaning chemicals. The lining is also very robust and winterproof thanks to the utilisation of special elastomers. A high level of quality is guaranteed by the fact that the lining is produced in Europe in accordance with harmonised quality and environmental standards and is CE-zertifiziert.

The lining is not only very durable, but it can also be easily repaired. This is because the pool lining can be cut to size without difficulty with the correct tools. All cut edges are automatically welded using the appropriate fusion welding process and the resulting welded seam is extremely hard-wearing. This means that the lining is also well protected from mechanical damage and chemical reactions, and can be replaced quickly and simply.

A specialised coating is used for the welded seams, which makes them very resistant to abrasion and chemical reaction. This increases the life of the lining and significantly reduces the amount of maintenance required for your pool. In addition, the coating also protects the lining against damage from sunlight and other external influences.

The welded seams and the coating are extremely hard-wearing, making them an ideal alternative to unwelded liners. In addition to this, the lining is also resistant to chemical attack and has good insulation properties. In this way, the lining is an excellent replacement for your old pool lining Poolfolie rund and offers great protection against corrosion and damage to your steel-walled swimming pool.

To prevent abrasion of the lining and avoid damage to the welded seams, it is advisable to clean the welded areas regularly with a suitable cleaning agent. This will also help to keep the surface of the lining as smooth and shiny as possible.

It is not a good idea to use abrasive products to clean the lining, as this can cause the lining to become scratched. It is therefore a good idea to use cleaning agents with a low pH value and to wipe the surface of the lining with a soft cloth from time to time in order to maintain its good condition.

When cleaning the lining, it is important to take care not to use too much pressure, as this can result in damage to the fibres. It is also a good idea to wear rubber gloves during the cleaning process.

If the lining is damaged, it should be repaired immediately, so that further damage can be prevented. To do this, simply remove the lining from its position and then clean the affected area thoroughly. After this, the lining should be re-glued and then pressed onto the edge of the pool. This can be done by hand or with a power tool, if necessary. Then the damaged area can be sealed with a suitable pool sealant.